24
in a serpentine shape to create multiple parallel lines. No
LTU modules are used.
7.
Geode Configuration of Segment 1: Allows the user to set
or view the channel configuration for each GEM3D receiver
in the segment (line). There is only one segment for the
GEM3D setup.
8.
AFE Batch Settings: Setup of gain and filter settings.
9.
Channel Info of Segment 1: Allows for setting the grid
coordinates, dipole length (or coil serial number), azimuth,
filters and viewing the AC-DC noise and contact resistance
for each channel.
10.
Data Folder and Calibration Folder creates and points to the
location of the data and calibration files respectively.
11.
Import Layout and Export Layout reads or saves the patch
setup as a template for future surveys.
iv.
GPS:
This screen sets up parameters for GPS synchronization with the transmitter and provides
information about the status of the GPS. The Com Port setting must match the Com Port
assigned to the GPS. The available com ports are displayed in the “All Com Port(s)” field. If it is
not clear which port is assigned to the GPS go to the Control Panel, select Device Manager then
Ports and view the COM PORT assignment for the device.
