Geolux GLX-RSS-2-300 WL, User Manual

Page: 47 / 71

GLX-RSS-2-300 WL User Manual
44
GLX-RSS-2-300 WL Non-Contact Flow Meter
Name Command Response Details
Send Data aD0! a<val0><CR><LF>
a<val0><CRC><CR><LF> val0 → a±f±f+d+d+d <cl><rf>
±f - discharge in defined units
±f - average velocity in defined
units
+d - average SNR in dBm
+d - angle in dBm
+d - signal quality
(3->unacceptable, 2 ->low,
1->good, 0->excellent )
val1 → a±f±f±d±f <cl><rf>
±f - relative level depending on
sensor height in defined units
±f - distance from sensor to water
in defined units
±d - level SNR in dBm
±f - standard deviation of water
level in mm
val2 → a±d+d+d <cl><rf>
±d – internal device temperature
in °C
+d – measured tilt angle
of device in x direction
+d – measured tilt angle
of device in y direction
aD1! a<val1><CR><LF>
a<val1><CRC><CR><LF>
Additional Data aD1! .. aD9! a0<CR><LF>
a0<CRC><CR><LF>
Concurrent
Measurement
Send Data
aC!/aCC! ammm12<CR><LF>
aD0! a<val0><CR><LF>
a<val0><CRC><CR><LF>
aD1! a<val1><CR><LF>
a<val1><CRC><CR><LF>
aD2! a<val2><CR><LF>
a<val2><CRC><CR><LF>
Additional Data aD3! ... aD9! a<CR><LF> a<CRC><CR><LF> No values are returned for
additional data.
Continuous
Measurement
aR0! ... aR9! a<CR><LF>
a<CRC><CR><LF>
The continuous mode is not sup -
ported
Get Velocity/
Discharge Unit
aXGWUN! a+d<CR><LF> +d – measurement unit for veloc -
ity 0 – mm/s, 1 – m/s, 2 – mph, 3
– km/h, 4 – fps, 5 – fpm
Set Velocity/
Discharge Unit
d! a+d<CR><LF> +d – measurement unit for veloc -
ity 0 – mm/s, 1 – m/s, 2 – mph, 3
– km/h, 4 – fps, 5 – fpm
Get Velocity
Average Factor
aXGWAV! a+d<CR><LF> +d – averaging velocity length
1-512
Set Velocity
Average Factor
d! a+d<CR><LF> +d – averaging velocity length
1-512
Get Direction Filter
Factor
aXGDFT! a+d<CR><LF> +d – direction filter for velocity
0 – both, 1 – incoming, 2 – outgo -
ing
Set Direction Filter
Factor
d! a+d<CR><LF> +d – direction filter for velocity
0 – both, 1 – incoming, 2 – outgo -
ing