Geolux GLX-RSS-2-300 WL User Manual Download Page 50

Page: 50 / 71

GLX-RSS-2-300 WL User Manual

GLX-RSS-2-300 WL Non-Contact Flow Meter

Radar Configurator Utility

Geolux provides a user-friendly PC application, Geolux Instrument Configurator, for configuring

the surface velocity radar operating parameters. Additionally, the Geolux Instrument Configurator

displays measurements.
When started, the Geolux Instrument Configurator displays its main window. Initially, no data is

displayed, as the connection to the surface velocity radar is not established.

Picture 7. Geolux Instrument Configurator Main Window

To connect the Geolux Instrument Configurator with the flow meter, connect your PC to the radar using

a serial cable connection. Then, click the

Connect

button in the upper left corner and select

Flow Meter

from the window which appears. In the next window, select the appropriate COM port and interface.

If RS-485 interface is selected, additionally select the baud rate and the Modbus ID. In case of multiple

devices connected on a single RS-485 bus, make sure that each device has a unique Modbus ID. When

the

Connect

button is clicked, Geolux Instrument Configurator will try to establish a data link between

your PC and the flow sensor. If the connection is successful, the device will appear under

Connected

devices

and the measurements will be displayed in the

Data

tab, Picture 8. A detailed description of

the displayed parameters is available when hovering the mouse over the icon of a specific parameter.

Initially, only the most important parameters are displayed while the rest are hidden. By clicking the

button with arrows next to the displayed parameters, the user can view all the data received from the

device.

Summary of Contents for GLX-RSS-2-300 WL







































































Search results

Summary of Contents for GLX-RSS-2-300 WL

Reviews:

Related manuals for GLX-RSS-2-300 WL

Brands by name

Popular brands

Geolux GLX-RSS-2-300 WL, User Manual

Search results

Summary of Contents for GLX-RSS-2-300 WL

Reviews:

Related manuals for GLX-RSS-2-300 WL

Brands by name

Popular brands