Part No. 114047
Self-Propelled Servicing Platform
31
Operator's Manual
Second Edition • Fifth Printing
Observe and Obey:
The transport vehicle must be parked on a level
surface.
The transport vehicle must be secured to
prevent rolling while the machine is being
loaded.
Be sure the vehicle capacity, loading surfaces
and chains or straps are sufficient to withstand
the machine weight. See the serial plate for the
machine weight.
The machine must be on a level surface or
secured before releasing the brakes.
Be sure the turntable is secured with the
turntable rotation lock before transporting. Be
sure to unlock the turntable for operation.
Be sure the traction ramps are removed from the
drive chassis and stowed in the platform before
using the tie-down points.
Do not drive the machine on a slope that
exceeds the slope or side slope rating. See
Driving on a Slope in the Operating Instructions
section.
If the slope of the transport vehicle bed exceeds
the uphill or downhill maximum slope rating, the
machine must be loaded and unloaded using a
winch as described.
Free-wheel Configuration for
Winching
1 Chock the wheels to prevent the machine from
rolling.
2 Release the non-steer
wheel brakes by turning
over the drive hub
disconnect caps.
3 Be sure the winch line is
properly secured to the drive chassis tie points
and the path is clear of all obstructions.
After the machine is loaded:
1 Chock the wheels to prevent the machine from
rolling.
2 Apply the non-steer wheel brakes by turning
over the drive hub disconnect caps.
Transport and Lifting Instructions
Towing Instructions
Before towing:
1 Chock the wheels to prevent the machine from
rolling.
2 Attach the towing bar securely to the towing
vehicle and to the machine.
3 Disengage the rear
wheel brakes by
turning over the drive
hub disconnect caps.
4 Turn the steering
bypass valve counterclockwise to hydraulically
release the steering.
After the machine is towed:
1 Chock the wheels to prevent the machine from
rolling.
2 Disconnect the towing bar.
3 Turn the steering bypass valve clockwise to
restore the steering.
4 Engage the rear wheel brakes by turning over
the drive hub disconnect caps.
Disengage
Position
Engage
Position
Disengage
Position
Engage
Position
Summary of Contents for Z45/25J
Page 1: ......
