Genie Z45/25J, Operator'S Manual

Page: 30 / 38

28 Self-Propelled Servicing Platform Part No. 114047
Operator's Manual Second Edition • Fifth Printing
OPERATING INSTRUCTIONS
8 Unfold the auxiliary platform to the fully upright
position.
9 Secure the four pins at the toeboard.
10 Secure the four pins at the mid-rail.
To Stow Platform
1 Pull out the four pins from the mid-rail.
2 Pull out the four pins from the toeboard.
3 Fold the auxiliary platform down to a horizontal
position.
4 Pull out the pins from the hooks. Stow the
hooks and secure with the pins.
5 Lower the auxiliary platform and secure with the
pins to the main platform at the top rail and the
toeboard.
Machine Not Level Indicator
Light
Light on indicates the machine is not
level. The tilt alarm will be sounding
when this light is on. Move the
machine to a firm level surface.
Work Lights
The on/off switch for each light is on the back of
the light.
The light can be removed from the clamp for use.
Store lights in the clamp.
Climbing Cargo Ramp
Traction ramps are needed if climbing the cargo
ramp platform first.
1 Remove the traction ramps from the machine.
2 Place the traction ramps between the ramp toe
and the cargo ramp.
3 Drive the machine up the cargo ramp.
4 Move the function override toggle switch to
either side if the machine shuts down.
Note: Traction ramps must be stored on the
machine after use.