Page
D - 17
Document 57.0008.7200 - 05/2007
Handler with telescopic boom
GTH-3512
MAINTENANCE
■
D-3.14 ADJUSTING THE SENSOR DISTANCE
In case of a failure or complete malfunctioning of the sensors due to
a loosening of their fixing ring nuts, re-adjust their position:
1
Loosen nuts
A
fixing sensor
B
.
2
Set the mobile part
C
of the machine, controlled by the sensor,
as close as possible to it.
Move the sensor near the component until the LED indicator
D
lights up.
3
Move the sensor 1
÷
2 mm nearer. Smoothly tighten the sensor
fixing nut and the relevant lock nut.
One proximity sensor is installed on the machine:
N
°
1 proximity sensor disabling the use of the outriggers when
the boom is raised more than 2 metres above the ground
SERVICE INTERVAL
Running-in ____________________________
None
Ordinary ___________________
When necessary
1
÷
2 mm
Summary of Contents for GTH-3512
Page 2: ...Courtesy of Crane Market...
