Page
C - 33
Document 57.0008.7200 - 05/2007
Handler with telescopic boom
GTH-3512
OPERATING INSTRUCTIONS
Version with mechanical locking
To change an attachment, operate as follows:
•
Drive to the place where you will release the
mounted attachment (when possible, a solid and
sheltered site).
•
Disconnect the quick connectors of the attachment
(if any).
•
Pull out pin
B
locking the attachment after removing
the safety split-pin at its end.
•
Rest the attachment flat on the ground.
•
Pitch the attachment holding frame forward and
lower the boom to release the attachment upper
lock.
•
Move back with the machine and drive to the new
attachment to be coupled.
•
Hold the frame pitched forward and hook the
upper lock of the new attachment.
•
Retract and raise the attachment some
centimetres. It will centre automatically on the
quick coupling frame.
•
Refit pin
B
fixing it with its safety split-pin.
•
Re-couple the connectors of the attachment (if
any).
CAUTION
After substitution, visually check the attachment is
correctly coupled to the boom, before operating
the machine. A wrongly coupled attachment may
result in damage to persons or things.
Summary of Contents for GTH-3512
Page 2: ...Courtesy of Crane Market...
