Page
C - 30
Document 57.0008.7200 - 05/2007
Handler with telescopic boom
GTH-3512
OPERATING INSTRUCTIONS
■
C-5.3 HANDLING LOADS
■
C-5.3.1 Adjusting the forks
Forks shall be spaced to suit the load going to be
handled.
With floating forks
•
Loosen the nut of the locking screws
A
.
•
Raise the forks and slide them on the pivot until
correct spacing.
•
Lock the screws re-tightening the nut.
With FEM forks
•
Lift the clamping lever of the forks.
•
Slide the forks to the desired position, then re-lock
the lever.
CAUTION
•
The centre of gravity of the load must always
be halfway between the forks.
•
Ensure you exactly know the weight of the load
before handling it.
•
When extending the boom, do not exceed the
payload limit.
•
Refer to the payload limits given in the load
chart applied on the cab windscreen or in the
quick user’s guide.
•
Space the forks as wide as possible to suit the
load being handled.
Summary of Contents for GTH-3512
Page 2: ...Courtesy of Crane Market...