Page
D - 14
Document 57.0008.7200 - 05/2007
Handler with telescopic boom
GTH-3512
MAINTENANCE
■
D-3.9.2 Auxiliary circuits oil filter
To change the hydraulic oil filter cartridge of the service
circuits, proceed as follows:
1
Stop the machine on a level ground and engage the
parking brake.
2
Remove the inspection hatch
and unscrew the
oil filter fitted inside the tank.
3
Check the tank is clean, then fit a new filtering
element and refit the inspection hatch.
4
Check the oil level within the tank. Add new oil, if
necessary.
■
D-3.10 OIL LEVEL IN THE
DIFFERENTIAL GEARS
To check the oil level in the front and rear differential
gears:
•
Stop the machine on a level ground and engage the
parking brake.
•
Loosen level plug
and check if oil is level with the
hole.
•
If necessary, top-up through hole
until oil comes
out from hole
.
•
Refit and tighten plugs
and
.
To change the oil:
•
Place a container of suitable size under drain plug
.
•
Loosen the drain plug, the level plug
and the filler
and allow oil to flow out from the reduction gear.
•
Refit and tighten drain plug
.
•
Add new oil through the filler until it is level with hole
.
•
Refit and tighten plugs
and
.
SERVICE INTERVAL
Running-in _________
Within the first
10
hours
Ordinary __________________
Every
250
hours
SERVICE INTERVAL
Running-in ____________________________
None
Ordinary __________________
Every
500
hours
Summary of Contents for GTH-3512
Page 2: ...Courtesy of Crane Market...
