Page
C - 9
Document 57.0008.7200 - 05/2007
Handler with telescopic boom
GTH-3512
OPERATING INSTRUCTIONS
■
C-3.2.3 Turn signals - Windscreen wiper - Horn
- Lights
-
■
Horn function
:
When sliding the lever along its axis, horn switches
on, independently from other pre-set functions.
■
Windscreen washer function
:
Push the second stage of the lever along its axis to
direct a jet of water onto the cab windscreen.
■
Windscreen wiper function
:
To operate the windscreen wiper, rotate the lever tip to
one of the four positions:
0
Wiper OFF
J
Rear wiper (if any)
1
Low speed
■
Lights function
:
To switch the handler lights, lever can be set to three
different positions along its vertical axis:
0
low beam ON, stable condition
1
high beam ON, stable condition
2
high beam used for intermittent signalling; when
released, the lever springs back to position
0
.
■
Turn signals function
:
Set lever to pos.
1
to indicate a turn leftwards or to
pos.
2
to indicate a turn rightwards.
��� ��� ���
���
���
Summary of Contents for GTH-3512
Page 2: ...Courtesy of Crane Market...
