Commercial Operator Limited Warranty
The Genie Company (“Seller”) warrants to the original purchaser of the GCL-MT commercial door
operator (”Product”), subject to all of the terms and conditions hereof, that the product and all
components thereof will be free from defects in materials and workmanship under normal use for
the following period(s), measured from the date of installation.
Two (2) years or When the Operator exceeds 20,000 cycles of operation, as measured by the
integrated cycle counter contained in the Operator.
Seller’s obligation under this warranty is specifically limited to repairing or replacing, at its option,
any part which is determined by Seller to be defective during the applicable warranty period. Any
labor charges are excluded and will be the responsibility of the purchaser.
This warranty is made to the original purchaser of the Product only, and is not transferable or
assignable.
This warranty does not apply to any unauthorized alteration or repair of the Product, or to any
Product or component which has been damaged or deteriorated due to misuse, neglect, accident,
failure to provide necessary maintenance, normal wear and tear, or acts of God or any other cause
beyond the reasonable control of Seller.
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES, EITHER EXPRESSED OR
IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE.
IN NO EVENT SHALL SELLER BE RESPONSIBLE FOR, OR LIABLE TO ANYONE FOR, SPECIAL, INDIRECT,
COLLATERAL, PUNITIVE, INCIDENTAL OR CONSEQUENTIAL DAMAGES, even if Seller has been advised
of the possibility of such damages. Such excluded damages include, but are not limited to, loss of
goodwill, loss of profits, loss of use, cost of any substitute product, interruption of business, or other
similar indirect financial loss.
Claims under this warranty must be made promptly after discovery, within the applicable warranty
period, and in writing to the Seller or to the authorized distributor or installer whose name and
address appear below.
The purchaser must allow Seller a reasonable opportunity to inspect any Product claimed to be
defective prior to removal or any alteration of its condition. Proof of the purchase and/or installation
date, and identification as the original purchaser, may be required.
