Genie Raptor Manual Ver. 3.1
36
Edition. GN-April-2013
TOUR will be executed in programmed preset 1, 3 & 5.
The method for setting TOUR GROUP 1 in PRESET is as follows:
1. Register “1” as a TOUR NO.
2. Change the status of TOUR NO DEF from OFF to ON and press the IRIS OPEN KEY.
3. Input the desired PRESET number from 1 onward in sequential order.
4. Press the IRIS CLOSE KEY to finalise the setting.
•
NAME
Change the name of a TOUR GROUP.
The method for changing the name is as follows:
1. First change TOUR NAME DEF from OFF to ON, then press the IRIS OPEN KEY.
2. Changing a Tour Group name uses the same method shown in “1.3 CAMERA NAME
DISPLAY”.
•
DWELL TIME
Is the waiting time between a PRESET execution and moving to the next PRESET.
Caution
If TOUR GOURP1 PRESET is set up as follows.
After moving through PRESET1 > PRESET2 > PRESET3, the camera returns to PRESET1.
If any PRESET is “OFF” during an operation in serial order, the camera returns to the first preset.
PRESET NUMBER
OFF / 1~128
PRESET NUMBER
OFF / 1~128
PRESET NUMBER
OFF / 1~128
PRESET NUMBER
OFF / 1~128
PRESET NUMBER
OFF / 1~128
EXIT
PRESET NUMBER
1
PRESET NUMBER
2
PRESET NUMBER
3
PRESET NUMBER
OFF
PRESET NUMBER
4
EXIT
