manualshive.com logo in svg

Genie CCTV Raptor II Ruggedized PTZ, Instruction Manual

Share
Download
Genie CCTV Raptor II Ruggedized PTZ Instruction Manual Download Page 33

33

Genie Raptor Manual Ver. 3.1

Edition. GN-April-2013

•       

SCAN

 

PAN moves from the start point to the end point and up to 5 Scans can be set up.

•       

PATTERN

 

The operational path of PAN/TILT actions is saved and PATTERN plays and repeats these 

 

PAN/TITL actions.

•       

AUTO PAN

 

Continually PANs.

•       

AUTORUN

 

OFF:  The camera is in a Standby condition.

 

SEQ, TOUR, SCAN, PATT, A.PAN: Are executed automatically after the user exits the OSD 

 

MENU.

•       

HOMEPOSITION

 

If there is any loss of power the camera goes to this programmed Preset.

 

If AUTORUN is set, the camera does not go to the programmed Preset.

 

Menu Shift:  

UP, DOWN, LEFT & RIGHT KEYS

 

Menu Open:    IRIS OPEN KEY

 

Menu Close: 

IRIS CLOSE KEY

3.1 PRESET

This function, after programming, moves the camera to a designated position.

1. PRESET NO                                 1~128
2. PRESET DEFINE                         OFF / <ON>
3. PRESET NAME                           OFF / <ON>
4. P/T POSITION                             XXX / YYY
5. FOCUS IN BW                             AUTO / ZOOMTG / MANUAL
6. WDR                                            OFF / ON
7. ATW                                             SET
8. EXIT

Summary of Contents for Raptor II Ruggedized PTZ

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands