Genie CCTV Raptor II Ruggedized PTZ Instruction Manual Download Page 40

Page: 40 / 48

Genie Raptor Manual Ver. 3.1

Edition. GN-April-2013

•

TILT ANGLE

Move to TILT ANGLE and Press the MANU KEY. To finish, press the MANU KEY.

Caution

ZOOM is automatically switched to 1x.

WDR, ATW are set to FACTORY DEFAULT.

If set an AUTO PAN with TILT over 90°, PAN/TILT automatically moves to the position

-20°~90° and TILT is limited to 90°.

MENU Shift: UP, DOWN, LEFT & RIGHT KEYS

MENU Open: IRIS OPEN KEY

MENU Close: IRIS CLOSE KEY

For Privacy protection, use and set MOSAIC ZONE.

•

AREA SEL

Up to 8 PRIVACY ZONES can be defined.

•

AREA DEFINE

OFF: PRIVACY ZONE is not activated.

ON:

PRIVACY ZONE is activated.

•

AREA COLOUR

The colour of the MOSAIC ZONE is selectable.

•

AREA NEW SET

OFF: Previous PRVIACY ZONE is activated.

ON:

New PRIVACY ZONE is set up from the current PAN/TILT position

(when switching from OFF to ON the PRIVACY ZONE appears in the centre on the screen).

4. ZONE SET

1. AREA SEL

1 ~ 8

2. AREA DEFINE

OFF / ON

3. AREA COLOUR

BLACK / MOSAIC

4. AREA NEW SET

OFF / ON

5. HEIGHT EDIT

XXX

6. WIDTH EDIT

XXX

7. PAN ANGLE

XXX

8. TILT ANGLE

XXX

9. EXIT

Summary of Contents for Raptor II Ruggedized PTZ

















































Search results

Summary of Contents for Raptor II Ruggedized PTZ

Reviews:

Related manuals for Raptor II Ruggedized PTZ

Brands by name

Popular brands

Genie CCTV Raptor II Ruggedized PTZ, Instruction Manual

Search results

Summary of Contents for Raptor II Ruggedized PTZ

Reviews:

Related manuals for Raptor II Ruggedized PTZ

Brands by name

Popular brands