5
Genie Raptor Manual Ver. 3.1
Edition. GN-April-2013
2. Safety Warning
* The purpose of this information is to ensure proper use of this product and to prevent danger and
damage to persons and property. Please observe all precautions.
* The precautions are divided into “Warnings” and “Cautions” as distinguished by the symbols shown
below;
Warning:
Ignoring these warnings may result in death or serious injury.
Caution:
Ignoring these cautions may result in injury or damage to property.
Warning
1. Only use the standard Raptor Power Adapter (Product Code RAP37-PSU) Using any other adapter
could cause fire, electrical shock, or damage to the product, and invalidate the warranty.
2. Before connecting the power supply, and signal wires, make sure the external connections are
isolated. Connect the alarm signal wires to the alarm terminals, the communication wires to the
terminal block and the AC adapter to the AC power input receptacle (incorrectly connecting the
power supply may cause fire, electrical shock, or damage to the product).
3. Do not connect multiple cameras to a single Raptor Power Adapter. Exceeding the adapter’s current
capacity can cause abnormal heat generation or fire.
4. Securely plug, or connect, the power cord into the power receptacle. An insecure or loose connection
may cause a fire.
5. When installing the camera on a wall or ceiling etc. fasten it securely using suitable anchor bolts
and/or fixings. An unsecured camera could fall and cause serious personal injury, or even a fatality.
6. Do not place conductive objects (e.g. screwdrivers, coins or other metal objects) inside any part of
the camera. Doing so may cause personal injury, a fire or an electrical shock.
7. Do not install the unit in humid or dusty locations. Doing so may cause a fire or electrical shock.
8. If any unusual smells or smoke come from the unit, stop using the product immediately, disconnect
the camera from the power source and contact your distributor.
9. If this product fails to operate normally, contact your distributor. Never disassemble or modify
this product in any way.
10. Always clean the camera with water and wipe the surface dry with a soft lint free cloth. Never use
detergents or chemical agents on the product, as this may result in discolouration of the painted
surface or cause damage to the finish.
Caution:
Instructions alert you to the
potential risk of injury or
damage to property
Warning:
Instructions alert you to the
potential risk of death or
serious injury
