Nov 00
Genicom
Publication No. GEG-99018A
GENICOM LN28 and microLaser 280 User Guide
4-19
Cleaning the Printer
11.
Verify that the power switch of the printer is in the [O] (off) position, then insert the plug of
the power cord into the AC outlet.
12.
Turn the printer on by pressing [ I ] on the power switch on the right side of the printer.
Cleaning Feed Rolls
Rubber feed rolls drive sheets of paper out of the front paper tray into the printer, and also drive
sheets of paper out of the main paper tray into the printer. These feed rolls wear with normal use
and eventually become coated with paper dust and must be cleaned. Frequent feed jams in the front
tray or main tray indicate that the feed rolls need to be cleaned.
Main Feed Roll
Use the following procedure to clean the main feed roll:
SIB048F
1
2
Summary of Contents for LN28
Page 1: ...Nov 00 Genicom Publication No GEG 99018A GENICOM LN28 and microLaser 280 User Guide SIB012F...
Page 3: ...Nov 00 Genicom Publication No GEG 99018A GENICOM LN28 and microLaser 280 User Guide iii...
Page 4: ...Publication No GEG 99018A Genicom Nov 00 iv GENICOM LN28 and microLaser 280 User Guide...
Page 12: ...Publication No GEG 99018A Genicom Nov 00 xii GENICOM LN28 and microLaser 280 User Guide...
