55
ReACT Pro
IMMEDIATE VIOLATION MODE AND GAUGE MODE
WARNING: The ReACT Pro enters Immediate Violation Mode when a
situation totally exceeds its capacity to predict an ascent procedure.
These dives represent gross excursions into decompression that are
beyond the boundaries and spirit of the ReACT Pro design, and a ReACT
Pro should not be used for the dives.
Gauge Mode Underwater
If a Decompression ceiling Stop Depth of 70FT (21M) or greater is required, an Immediate
Violation Mode (Gauge Mode) will be entered
. A single Long Beep will sound. This situation
would be preceded by entering Delayed Violation Mode, previously described.
The ReACT Pro would then operate with limited functions in
Gauge Mode
during the remainder
of that dive and for 24 hours after surfacing.
Gauge Mode
turns the ReACT Pro into a digital instrument without any decompression or oxy-
gen monitoring functions. Only Current Depth and the Ascent Rate Indicator will be displayed.
The full Nitrogen Bar Graph will flash as a warning (Fig. 61). Alternate Displays can be ac-
cessed using the LEFT button, and the Backlight can be activated using the RIGHT button.
Fig. 61 - Immediate Violation/
Gauge Mode Underwater
FT
FT
O
C
E
D
O
D
E
C
D
E
C
O
C
D
E
O
Flashing
Summary of Contents for React Pro
