Genesis React Pro, Owner'S Manual

Page: 25 / 88

25
ReACT Pro
SET MODE ACCESS
• To access the Set Mode while in the Surface Mode, press BOTH buttons simultaneously
and release them when the Set FO2 Default screen appears with the set point (ON or OFF)
flashing.
• To bypass a setting that you do not wish to change, press the LEFT button to move to the
next setting in the Sequence (Fig. 13).
• While in Set Mode, operation will automatically revert to Surface Mode if there is no but-
ton action for a period of 2 minutes.
TO SET FO2 (50%) DEFAULT - ON/OFF
Factory set for ON, the FO2 50% Default feature can also be set OFF.
• ON = FO2 Value set point reverts to 50% after dives (FO2 must be set prior to each dive)
• OFF = FO2 Value set point remains at the % set until changed or shut down
• press BOTH buttons while in Surface Mode, release when FO2 50 ON (or OFF) appears with
ON, or OFF, flashing (Fig. 14)
• press the RIGHT button to toggle between ON and OFF
• press BOTH buttons simultaneously for 2 seconds to revert to Surface Mode
Fig. 14 - Set FO2 Default
NITROX
E
D
E
C
O
Fig. 13 - Set Mode Sequence
SURFACE MODE THEN -
1 - FO2 50% DEFAULT
2 - UNITS OF MEASURE
3 - EXTERNAL ACCESS
4 - YEAR
5 - MONTH
6 - DAY
7 - HOUR FORMAT
8 - HOUR
9 - MINUTE
10 - SAMPLE RATE
11 - AUDIBLE ALARM
12 - WET ACTIVATION