Genesis React Pro, Owner'S Manual

Page: 28 / 88

28
TO SET DIVE PROFILE DATA SAMPLING RATE
This setting allows you to select the rate that the ReACT Pro samples data for on board storage in
memory for subsequent download to the PC software program. It does not affect the rate that
data is sampled for operational calculations and displays.
Factory set for 30 seconds, the Sample Rate can also be set for 15 or 60 seconds .
• press BOTH buttons while in Surface Mode, release when FO2 50 ON (or OFF) appears
• press the LEFT button 9 times to access Set Sampling Rate
• SEC and the numeric Rate appear with the Rate flashing (Fig. 19)
• press the RIGHT button until the desired RATE appears
• press BOTH buttons simultaneously for 2 seconds to revert to Surface Mode
TO SET ALARMS - ON/OFF
Factory set for On, the Alarms can also be set for Off.
• press BOTH buttons while in Surface Mode, release when FO2 50 ON (or OFF) appears
• press the LEFT button 10 times to access Set Alarms
• the graphic ALr appears with ON, or OFF, flashing (Fig. 20)
• press the RIGHT button to toggle between ON and OFF
• press BOTH buttons simultaneously for 2 seconds to revert to Surface Mode
Fig. 19 - Set Sample Rate
Fig. 20 - Set Alarm
C
E
D
E
D