36
No decompression times are only displayed for depths where there are at least 3 minutes of dive
time available at the depth, taking into account a descent rate of 60 feet (18 meters) per minute.
Depths greater than the maximum depth that can be achieved with a PO2 of 1.60 BAR will not
be displayed.
To access and view the Plan Mode while in Surface Mode:
press the LEFT button 3 times, while in Surface Mode (Surf > Temp > FO2 > Plan)
press and release the RIGHT button to advance through the sequence of Depths from 30 to
190 feet (9 to 57 meters) in 10 foot (3 meter) increments
press BOTH buttons simultaneously for 2 seconds to revert to Surface Mode
WARNING: If the Wet Activation feature is Set OFF, the ReACT Pro must
be manually activated prior to start of a dive. The unit will not activate
automatically by immersion in water unless the Wet Activation feature is
Set ON. Refer also to the Warning on page 72.
NO DECOMPRESSION DIVE MODE MAIN DISPLAY (FIG. 31)
The ReACT Pro will enter the No Decompression Dive Mode when you descend deeper than 5
feet (1.5 meters). This mode is identified by the Wave and Dive Profile symbols (Fig. 31a).
Dive Time Remaining with symbol NDL (or OTL) and Current Depth with symbol FT (or
M) will be displayed.
The operating mode symbol AIR (or NITROX) will also be displayed.
The Bar Graphs will indicate nitrogen loading and ascent rate.
Pressing the RIGHT button will activate the Hydroglow backlight.
Fig. 31 - No Deco Dive
FT
FT
NITROX
E
D
a
No Decompression Limits
for an Air Dive
(no dive made yet)
Depth
NDL
feet (meters)hours:mins
30 (9)
4:20 (4:43)
40 (12)
2:17(2:24)
50 (15)
1:21 (1:25)
60 (18)
:57
(:59)
70 (21)
:40
(:41)
80 (24)
:30
(:32)
90 (27)
:24
(:25)
100 (30)
:19
(:20)
110 (33)
:16
(:17)
120 (36)
:13
(:14)
130 (39)
:11
(:11)
140 (42)
:09
(:09)
150 (45)
:08
(:08)
160 (48)
:07
(:07)
170 (51)
:07
(:06)
180 (54)
:06
(:06)
190 (57)
:05
(:05)
Summary of Contents for React Pro
