© 2020 Genesis Attachments, LLC
Genesis GHG Handling Grapple
8
Check the Equipment
Before use, check the equipment to ensure it is in good operating condition.
Check the following:
3
Grease fittings. Pump grease at all fitting locations, see page 19.
3
Hydraulic fluid level. Add hydraulic fluid as required.
3
Hydraulic hoses and hose connections for wear or leaks. Repair or replace any damaged
hoses or connections.
3
All control levers for proper operation.
3
Rotation bearing. Visually check for loose or damaged bolts If re-
pair is required, refer to qualified personnel.
3
Grease rotation bearing and pinion gear.
3
Check for loose or missing pin retaining bolts.
3
Check cylinders for dents (barrel) or dings (rod).
GOOD
CONDITION
3
!
WARNING
Serious injury or death could result if warnings or instruc-
tions regarding carrier stability and the work area are not
followed properly.
Stability
Your Genesis attachment is sized for carrier stability. However, improper operation, faulty mainte-
nance or unauthorized modifications may cause instability.
3
Know the working ranges and capacities of the carrier to avoid tipping.
3
Use the recommended carrier counter weight.
The following conditions affect stability:
• Ground conditions
• Grade
• Weight of attachment
• Contents of attachment
• Operator judgement
For greater stability, knuckle the attachment to bring the load closer to the center of rotation (cen-
ter of gravity) while lifting. Use extra caution during reaching to avoid tipping.
OPERATIONAL SAFETY
