© 2020 Genesis Attachments, LLC
Genesis GHG Handling Grapple 17
Do not work on any hydraulic lines or components while they are pressurized. Escaping hydraulic
fluid can penetrate the skin, causing serious injury or death. Relieve pressure before performing
maintenance. Keep hands and body parts away from pin holes and nozzles,
which eject fluids under high pressure. Use a piece of cardboard to search
for leaks.
If fluid is injected into the skin, seek medical assistance immediately from a
doctor familiar with this type of injury.
Hydraulic oil becomes hot during operation. Do not let hydraulic oil or com-
ponents contact skin, as it could cause severe burns. Allow hydraulic com-
ponents to cool before working on them. Use protective clothing and safety
equipment.
Remove paint before welding or heating. Hazardous fumes/dust can be generated
when paint is heated by welding, soldering or using a torch. Do all work outside or in a
well ventilated area and dispose of paint and solvent properly.
When sanding or grinding paint, avoid breathing the dust. Wear an approved respira-
tor. If you use solvent or paint stripper, remove stripper with soap and water before
welding. Remove solvent or paint stripper containers and other flammable materials
from area. Allow fumes to disperse at least 15 minutes before welding or heating.
Avoid fire hazards. Keep the area clean. Remove all flammable materials
from the area during any welding or heating process. Have a fire extinguish
-
er nearby and know how to use it.
Never substitute pins or bolts. Use factory supplied pins. Replace all bolts
with the same size and grade. Failure to do so may cause serious injury or
death.
See “Use Care with Hydraulic Fluid Pressure”, page 12
NOTICE
MAINTENANCE SAFETY
