© 2020 Genesis Attachments, LLC
Genesis GHG Handling Grapple 19
Use a lithium-based premium EP #2 in normal conditions above 32° F (0° C). Use Grade 0 in tem-
peratures below freezing.
Grease all fittings every four to eight hours of operation (see maintenance schedule). Grease until
extrusion is visible.
After greasing the rotation bearing, rotate the attachment through two full rotations. The cylinder
and pivot should be greased at four hours and eight hours of operation, while the attachment is
warm. The bracket and rotation should be greased at the end of an eight-hour shift.
Grease locations:
1. H-link pin (grease through H-link) - not shown
2. Stick pin - not shown
3. Attachment cylinder rod
4. Attachment cylinder butt
5. Pivot pins
6. Rotation bearing (four locations)
7. Rotation bearing gear teeth
8. Drag link pins
4
8
3
LUBRICATION POINTS
!
DANGER
Shut off excavator and disable hydraulics per OEM
instructions before greasing.
5
6
7
