Generalmusic WK3 World Keyboard, Owner'S Manual

Page: 229 / 320

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Edit General 14•7
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Edit General 14•7
Page 6/7 - Computer port & Pedalboard functions
COMPUTER... (F1, F2)
Enables or disables the Computer port for MIDI
transmission via a serial cable. Depending on
the type of computer WK3 connects to, this pa-
rameter must be appropriately set. For IBM PC
and compatibles, set either PC1 or PC2 accord-
ing to the transmission velocity required. For a
Macintosh connection, select MAC. When this
parameter is set to OFF , the instrument’ s MIDI
Interface is operative. Any other setting for com-
puter use disables the MIDI ports for transmis-
sion and reception. It is not possible to use the
MIDI and COMPUTER ports simultaneously.
Rotate the DIAL to change the parameter status.
Assignable values: Off (MIDI Connection En-
able), PC1 (RS 232 Slow Serial Port), PC2 (RS
232 Fast Serial Port), MAC (RS 422 Serial Port)
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
©
Note : The PEDALBOARD and COMPUTER
connectors are alternative. Selecting one renders
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ the other inoperative.
PEDALBOARD FUNCTION (F3, F4)
Provides options for a Pedalboard connected to
the Pedalboard socket.
Off - Pedalboard deactivated.
Chord - disables chord recognition on the key-
board and passes over to the pedalboard. To
play minor and sevenths, play two bass notes at
the same time. Alternatively , you can program
the Pedals 1 or 2 to select minor and seventh
chords.
Bass/S - allows you to play Bass with Sustain on
the Pedalboard.
Bass - deactivates the bass track of the auto-
accompaniments and transfers it to the
Pedalboard, allowing you to play the bass with
the pedalboard.
Multifunction - the pedalboard is transformed
into a multi-function device where each note ac-
tivated a function:
Note Function Note Function
C2 Start/Stop C#2 Tempo –
D2 Intro D#2 Tempo +
E2 End F2 Var 1
F#2 Fill< G2 Var 2
G#2 Fill >< A2 Var 3
A#2 Var 4 B2 Fill>
C3 Key Start
Rotate the DIAL to change the parameter status.
Assignable values: Off, Chord, Bass/S, Bass,
Multi
Page 6/7 - Computer port & Pedalboard functions
COMPUTER... (F1, F2)
Enables or disables the Computer port for MIDI
transmission via a serial cable. Depending on
the type of computer WK3 connects to, this pa-
rameter must be appropriately set. For IBM PC
and compatibles, set either PC1 or PC2 accord-
ing to the transmission velocity required. For a
Macintosh connection, select MAC. When this
parameter is set to OFF, the instrument’s MIDI
Interface is operative. Any other setting for com-
puter use disables the MIDI ports for transmis-
sion and reception. It is not possible to use the
MIDI and COMPUTER ports simultaneously.
Rotate the DIAL to change the parameter status.
Assignable values: Off (MIDI Connection En-
able), PC1 (RS 232 Slow Serial Port), PC2 (RS
232 Fast Serial Port), MAC (RS 422 Serial Port)
○○○○○○○○○○○○○○○○○○ ○ ○
©
Note: The PEDALBOARD and COMPUTER
connectors are alternative. Selecting one renders
○○○○○○○○○○○○○○○○○○ ○ ○
the other inoperative.
PEDALBOARD FUNCTION (F3, F4)
Provides options for a Pedalboard connected to
the Pedalboard socket.
Off - Pedalboard deactivated.
Chord - disables chord recognition on the key-
board and passes over to the pedalboard. To
play minor and sevenths, play two bass notes at
the same time. Alternatively, you can program
the Pedals 1 or 2 to select minor and seventh
chords.
Bass/S - allows you to play Bass with Sustain on
the Pedalboard.
Bass - deactivates the bass track of the auto-
accompaniments and transfers it to the
Pedalboard, allowing you to play the bass with
the pedalboard.
Multifunction - the pedalboard is transformed
into a multi-function device where each note ac-
tivated a function:
Note Function Note Function
C2 Start/Stop C#2 Tempo –
D2 Intro D#2 Tempo +
E2 End F2 Var 1
F#2 Fill< G2 Var 2
G#2 Fill >< A2 Var 3
A#2 Var 4 B2 Fill>
C3 Key Start
Rotate the DIAL to change the parameter status.
Assignable values: Off, Chord, Bass/S, Bass,
Multi