Generalmusic WK3 World Keyboard, Owner'S Manual

Page: 197 / 320

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Edit MIDI 13•11
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Edit MIDI 13•11
3. Select the parameter according to the data
you wish to dump.
4. Once selected, press the corresponding but-
ton again to gain access to the parameter.
The display prompts you with a request to give
the data dump a name.
5. Insert a name of up to 8 characters.
An identifying extension will be automatically
attached to the inserted name (.ALL, .PRF ,
.SEQ).
6. Press ENTER to execute the dump, or ES-
CAPE to cancel the operation.
Confirming the operation starts the Dump
Save procedure, during which time the key-
board is disabled. A bar graph monitors the
progress of the dumping process.
When the data has been transferred to the
external device, transmission stops and WK3
is restored to normal playing conditions.
7. Press ESCAPE to return to the main menu,
or press MIDI to exit from MIDI Edit.
CLOCK (F7) - MAIN DISPLAY
1/1 MIDI: EDIT MIDI
Channel Filter Local Dump Clock Set
This function opens a single level consisting of
two general parameters: MIDI Clock, MIDI Start/
Stop.
MIDI CLOCK (F1, F2, F3)
Press CLOCK in the main menu to enter the sin-
gle level of parameters.
The MIDI Clock corresponds to the MIDI
synchroniser which synchronises WK3 with ex-
ternal clock based devices (rhythm units and
sequencers).
Internal renders WK3 independent from the
Clock of other MIDI devices.
External places WK3 on stand-by , waiting to re-
ceive a STAR T/STOP command from the exter-
nal MIDI device connected to WK3’s the MIDI IN.
The external device also controls the WK3 Tempo
(the WK3 Tempo setting sets to 0 automatically
when External is selected).
The Song Position Pointer is received and trans-
mitted with the same precision as MIDI (1 tick =
1/24th of a beat). This parameter allows a Song
to be stopped at a precise point.
Use the standard Edit procedure. Press ESCAPE
to return to the main display.
1/1 MIDI CLOCK: [MIDI CLOCK]
Clock=Internal Start/Stop=Off
MIDI: Clock
Assignable values: Internal, External.
MIDI STAR T/STOP (F4, F5, F6)
This parameter determines whether or not the
WK3 receives the Start/Stop command from ex-
ternal MIDI devices.
Start/Stop is a System Real Time message which
is used to start or stop clock based MIDI equip-
ment.
If MIDI Start/Stop is set to On, WK3 cannot re-
ceive a Start/Stop command from an external
MIDI controlling device.
• For example , if you want to pilot the WK3
sounds from a master keyboard without fear of
triggering the sequencer from the Start/Stop com-
mand of the controlling device, set the MIDI Start/
Stop parameter to On. In this way, if you inad-
vertently press the master keyboard’s Start com-
mand, WK3 ignores the message.
When MIDI Start/Stop is set to Off, WK3 receives
the Start/Stop command from an external MIDI
device.
3. Select the parameter according to the data
you wish to dump.
4. Once selected, press the corresponding but-
ton again to gain access to the parameter.
The display prompts you with a request to give
the data dump a name.
5. Insert a name of up to 8 characters.
An identifying extension will be automatically
attached to the inserted name (.ALL, .PRF,
.SEQ).
6. Press ENTER to execute the dump, or ES-
CAPE to cancel the operation.
Confirming the operation starts the Dump
Save procedure, during which time the key-
board is disabled. A bar graph monitors the
progress of the dumping process.
When the data has been transferred to the
external device, transmission stops and WK3
is restored to normal playing conditions.
7. Press ESCAPE to return to the main menu,
or press MIDI to exit from MIDI Edit.
CLOCK (F7) - MAIN DISPLAY
1/1 MIDI: EDIT MIDI
Channel Filter Local Dump Clock Set
This function opens a single level consisting of
two general parameters: MIDI Clock, MIDI Start/
Stop.
MIDI CLOCK (F1, F2, F3)
Press CLOCK in the main menu to enter the sin-
gle level of parameters.
The MIDI Clock corresponds to the MIDI
synchroniser which synchronises WK3 with ex-
ternal clock based devices (rhythm units and
sequencers).
Internal renders WK3 independent from the
Clock of other MIDI devices.
External places WK3 on stand-by, waiting to re-
ceive a START/STOP command from the exter-
nal MIDI device connected to WK3’s the MIDI IN.
The external device also controls the WK3 Tempo
(the WK3 Tempo setting sets to 0 automatically
when External is selected).
The Song Position Pointer is received and trans-
mitted with the same precision as MIDI (1 tick =
1/24th of a beat). This parameter allows a Song
to be stopped at a precise point.
Use the standard Edit procedure. Press ESCAPE
to return to the main display.
1/1 MIDI CLOCK: [MIDI CLOCK]
Clock=Internal Start/Stop=Off
MIDI: Clock
Assignable values: Internal, External.
MIDI START/STOP (F4, F5, F6)
This parameter determines whether or not the
WK3 receives the Start/Stop command from ex-
ternal MIDI devices.
Start/Stop is a System Real Time message which
is used to start or stop clock based MIDI equip-
ment.
If MIDI Start/Stop is set to On, WK3 cannot re-
ceive a Start/Stop command from an external
MIDI controlling device.
• For example, if you want to pilot the WK3
sounds from a master keyboard without fear of
triggering the sequencer from the Start/Stop com-
mand of the controlling device, set the MIDI Start/
Stop parameter to On. In this way, if you inad-
vertently press the master keyboard’s Start com-
mand, WK3 ignores the message.
When MIDI Start/Stop is set to Off, WK3 receives
the Start/Stop command from an external MIDI
device.