23
Model TA502A
Figure 22: Entering the Password
4.4.2 Entering
the Inhibit Mode
This option applies to the Setup Mode only: If the password option is disabled, or
after the correct password has been entered, the display will indicate
In
for five
seconds (Figure 23). Pressing the Mode/Select switch while
In
is displayed will cause
the unit to enter the Inhibit mode by inhibiting the alarm outputs. After the Model
TA502A has entered the Inhibit Mode, pressing the Mode/Select switch causes the
unit to return to normal operation (see Section 4.4). If it is desired to enter the Setup
Mode, do not press the Mode/Select switch for the five seconds that
In
is displayed.
Figure 23: Entering the Inhibit Mode
