x
Model TA502A
Quick Start Guide
Mount and Wire the Card and Card Rack.
A rack or panel mounted chassis will be required when installing any Zero Two
Series Module. The chassis should be mounted in non-hazardous, weather-protected
locations and should be subjected to minimal shock and vibrations. The rack and
panel mounted chassis are available in 2-, 4-, 8-, and 16-channel sizes. Multiple 16-
channel chassis may be connected to each other to form larger systems.
Figure 1: Rack & Panel Mounting
In installations where two or more module types are to be mixed in the same chassis,
ensure that the individual coding strips match the channel application. The coding-
strips are pre-configured at the factory and the male portion is already on each
module. The female portion, if un-mounted, must be fastened into position on the
mounting strip of the desired chassis channel to mate with its counterpart on the
module (see Figure 2 below).
Figure 2: Control Module Coding Strip
