29
Model FL4000H
Figure 17: Dimensional Drawing
3.6 Terminal Connections
All wire connections are made through the ¾ inch (1.9 cm) NPT openings in the Base Housing
to the Terminal Block. The Terminal Block is located in the Base Housing Assembly and
accepts 14 AWG (2.08 mm
2
) to 22 AWG (0.33 mm
2
) stranded or solid-core wire. Each wire
should be stripped as shown in Figure 18.
Figure 18: Wire-Strip Lengths
To connect the wire to the Terminal Block, insert the conductor into the connection space
(Figure 20) and tighten the corresponding screw terminal.
.
Summary of Contents for FL4000H
Page 2: ...ii Model FL4000H This page intentionally left blank ...
Page 8: ...viii Model FL4000H Figure 2 Mounting Instruction Figure 3 Wall Mounting Assembly ...
Page 28: ...28 Model FL4000H Figure 16 Detector Mounting and Installation ...
Page 61: ...61 Model FL4000H 6 2 Final Assembly Figure 26 FL4000H Cross Section View ...
