5-6
UAS 7626 DIU
GDC 087R706-000-02
Table 5-1
Unit Configuration Option Settings
The Unit Configuration procedure involves the following steps:
1.
From the Configuration menu, select the Unit Configuration screen by typing 1 and press-
ing the Enter key.
2.
Type the selection number of the loop you intend to configure and press the Enter key.
Highlighting appears on the Data Rate current setting field for the selected loop.
3.
Use the up and down arrow keys to toggle the highlighted field through its potential set-
tings, or use the right and left arrow keys to shift the highlighting to one of the row’s other
current setting fields.
4.
When the three fields in the selected row display the desired settings, press the Enter key.
The highlighting disappears and the cursor returns to the Select field at the bottom of the
screen.
5.
Repeat steps 2 through 4 for each loop you need to configure. Remember that when you set
a loop to 128 kbps it occupies two timeslots on the backplane data highway.
6.
To put the configuration changes you’ve made into effect, type S (Save) and press the Enter
key. You may use either upper or lower case for letter responses.
In response, the screen prompts for confirmation:
*WARNING - SAVING DISRUPTS COMMUNICATIONS Continue? [ ] Y(es), N(o)
7.
Continue the save process by typing
Y
and pressing the Enter key, or abort the save by typ-
ing
N
and pressing the Enter key.
If you continue the save, the word
SAVING
is displayed at the bottom of the screen. When
Option
Function/Potential Settings
[0] Return to Main Menu
Returns you to the UAS 7626 Main Menu.
Data Rate
Highway
Timeslot
Loops:
[1] Loop 1
[2] Loop 2
[3] Loop 3
[4] Loop 4
[5] Loop 5
[6] Loop 6
Disabled (Default)
64K
128K
One
Two
Three
Four
Five
Six
Seven
Eight
Disabled
Selects which backplane
data highway the DIU
employs to exchange
loop data with the NIU.
Set to Disable when the
loop is not used
1 – 31
NA (Not Assigned)
Selects which timeslot
(DS0) in the selected
backplane data highway
the DIU employs to ex-
change data with the NIU.
When Data Rate is 128 K,
Timeslot assignment in-
cludes the specified
timeslot and the one im-
mediately following.
Set to NA when the loop is
not used.
Settings 25 – 31 are valid
only for use with UAS
7002 NIU.
[CR]Return to Previous
Menu:
Returns you to the UAS 7626 Configuration menu screen
[S] Save
Saves settings
