
Page
25
of
42
5.15
Low Measurement Log
As previously shown an alarm limit can be set in the settings window, therefore any measurement that is
taken that falls below the alarm limit will be recorded in the Alarm Log. To access the alarm log at any time,
select ‘Alarms’ in the toolbar.
Figure 28
The alarms window displays the following information for each measurement that drops below
your chosen Alarm limit: -
1.
Timestamp of most recent recording for relevant channel.
2.
Name of Board that has had a channel drop below alarm limit.
3.
Name of channel on board that has dropped below alarm limit.
4.
Recorded Value that has dropped below alarm limit.
5.
How many times channel has dropped below alarm limit.
Figure 29