
Page
14
of
42
5.5
Communication Setup
Upon opening the A software to enter the settings window select the ‘settings Cog’ in the top
right-hand corner of the software.
Figure 9
This will then open the settings window, at this point the user must select which communication port the
A is connected to (this will automatically appear in the drop-down menu) and which machine
type, either a 64, 128 or 256. The user will also have the option to choose (if applicable) which CLR bridge to
attach.
N.B. The correct machine type must be selected even if the user is not going to monitor all channels.
Figure 10
5.6
X Axis format Selection
During this setup stage the desired format of the user for the graph X-Axis can be selected, there are 3 axis
options available to the user which are: -
1.
Measurement Number
2.
Time in Minutes
3.
Time in Hours