V12/19
12
•
Safety Instructions
iONstream 4.0
During installation and removal
ATTENTION
Damage to components
► Do not drill holes in the bar housing, and follow the wiring
instruction accurately to avoid equipment damage.
WARNING
Danger of electric shock
► Do not install or remove iONstream equipment while the
machinery and/or application are operational.
WARNING
Danger of electric shock
► Always disable the 24 VDC power supply when installing or
removing the iONstream system.
WARNING
Danger of electric shock
Persons with a pacemaker must not touch the emitter pins!
► Pacemakers may no longer function correctly when the distance
between emitter pins and chest is < 3.5 cm.
► Touching the emitter pins, especially with a large surface area
such as the palm of your hand, can temporarily switch a
pacemaker into error mode and may result in major health risk.
WARNING
Danger of electric shock
► Keep neutralizing bars wired to ground at all times while the
system is operational regardless of whether the 24 VDC power
supply is operational or not.