GEM WK1, Owner'S Manual, Page: 88 / 105

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Midi/General 79
IN IN IN IN IN TRHU OUT TRHU OUT TRHU OUT TRHU OUT TRHU OUT
MIDI MIDI MIDI MIDI MIDI
MIDI IN MIDI OUT MIDI IN MIDI OUT
MIDI IN MIDI OUT MIDI IN MIDI OUT
MIDI IN MIDI OUT
MIDI MIDI
MIDI MIDI MIDI
WK1 Computer
ChnLoc ChnLoc ChnLoc ChnLoc ChnLock k k k k : (ON/OFF) The CHANNEL LOCK function locks the current
Performance setting to the entire instrument. Before using this
function you should set ChnLock to ON status, then modify the setting
of the MIDI channels. This is the only way to apply the MIDI channel
setting to the entire instrument. Use the TEMPO/DATA to set this
function to ON or to OFF.
The last setting saved will be maintained in the machine memory even
when WK1 is turned off, provided that the first Performance, which is
the one on which WK1 sets by default upon turning on, has been saved
to Store Performance.
Dump Dump
Dump Dump Dump : DUMP function transmits all data from WK1 internal memory
via MIDI: this is a further possibility to safeguard valuable data.
To dump data to any data filer (computer, sequencer, etc), proceed
as follows:
1) Connect WK1 MIDI OUT port to the MIDI IN of the external
device.
2) Use the PAGE and PAGE keys to select DUMP page. Now
select the type of data you wish to transfer (ALL, SEQ, PERF)
with the TEMPO/DATA keys.
3) Recording procedure starts in the external device.
4) When finished, press ENTER twice.
RICEZIONE DEI D RICEZIONE DEI D
RICEZIONE DEI D RICEZIONE DEI D
RICEZIONE DEI DA A
A A
ATI SAL TI SAL
TI SAL TI SAL
TI SALV V
V V
VA A
A A
ATI TI
TI TI
TI
Per ricevere i dati preventivamente salvati, collega la presa OUT
dell’unità esterna alla presa IN della
WK1 WK1
WK1 WK1 WK1 e invia i dati;
WK1 WK1
WK1 WK1 WK1 si pre-
dispone automaticamente alla ricezione del MIDI DUMP.
Proseguendo ora con i tasti Page, incontri le ultime pagine del MIDI/
GENERAL:
Initializ Initializ Initializ Initializ InitializeALL eALL eALL eALL eALL : questa funzione ti permette di inizializzare la tua WK1 WK1 WK1 WK1 WK1
e ripristinare la sua condizione al momento dell’acquisto (ALL).
Puoi anche agire su porzioni della memoria inizializzando le Perfor-
mance (PFM), gli eventi del sequencer (SEQ) e i Samples (SMP);
basta usare i tasti TEMPO/DATA per scegliere cosa inizializzare e
premere ENTER due volte.
rEL XX_XX_XX rEL XX_XX_XX
rEL XX_XX_XX rEL XX_XX_XX rEL XX_XX_XX (DATE): This message appears in the last page of
the MIDI/GENERAL section. The display shows the date of the latest
operating system installed on board.
Press ESCAPE to exit the current mode.