GEM WK1, Owner'S Manual, Page: 71 / 105

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
62 Owner’s Manual
Always remember that simple Variations lead to the best results. A
simple Variation can be enhanced and enriched by adding new tracks.
For example, you can record Major Variation 1 on three tracks only
(Drums, Bass, Acc1) and with simple patterns.
Record Variation 2 setting Major e Minor in the same tracks (Drums,
Bass, Acc1), but adding small differences. Variation 4 can be recorded
on 4 tracks (Drums, Bass, Acc1, Acc2) and further changes to its
patterns. Variation 4 could feature Major, Minor and 7th chords on all of
the five tracks (Drums, Bass, Acc1, Acc2, Acc3) and more complex
Riffs.
NOTE: Each Variation may only contain a Fll pattern.
11. When you finish recording, press ESCAPE to exit the Sequencer
mode.
User Style playback
1.Press the Start/Stop key to start the User Style. 1.Press the Start/Stop key to start the User Style. 1.Press the Start/Stop key to start the User Style. 1.Press the Start/Stop key to start the User Style. 1.Press the Start/Stop key to start the User Style.
Not Not Not Not Not a: If you have recorded less then 4 Variations, make sure that the
leds corresponding to the Variations are ON. If they are not, no sound
will be heard.
2. Play with your User Style as if you were using a normal ROM Style.
Modifying a User Style
Overdub, Quantize, Clear Note, Clear Riff,
Clear Tempo, Clear All Style
Various options are available to modify your User Style.
You can apply changes as soon as you have finished recording a Riff or
a Style.
1 1 1 1 1
. If you have finished recording a Riff, do not exit the Record mode.
2 2 2 2 2 . If you are not in Record mode, press the RECORD key to enable the
mode, then use the + and - to select the Riff you wish to modify. Select
the desired track by pressing the corresponding Function (F1 - F5) key.
Your style can now be modified. The following modification options are
possible:
Adding new elements (Overdub) Adding new elements (Overdub)
Adding new elements (Overdub) Adding new elements (Overdub)
Adding new elements (Overdub)
You can add new elements to a recorded Riff.
1 1
1 1 1 . Set the Riff to Record mode.
2 2 2 2 2 . Play the notes you wish to add to the pattern. The new elements will
be added (overdub) the existing ones.
3 3
3 3 3 . Stop the recording and repeat the procedure for each track you wish
to modify.