GEM WK1, Owner'S Manual, Page: 31 / 105

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
22 Owner’s Manual
----------------- TASTIERA INTERA ----------------------
(Upper 1, Upper 2)
TASTIERA DIVISA
--------- Lower -------- ------------------ Upper 1, Upper 2 -------------------
• 3 Sounds and Performances
SOUNDS AND TRACKS
A Sound is assigned to each Performance track.
THE REAL TIME KEYBOARD SECTIONS (UPPER 1,
UPPER2, LOWER)
The display constantly shows which tracks are assigned to the
accompaniment and which ones are assigned to the keyboard section
(this does not happen only when a special mode is selected, where the
deactivation of the tracks is required).
The sections that can be played in Real Time are : Upper 1, Upper 2 e
Lower; they correspond respectively to tracks 7, 8 e 9.
SOUNDS AND KEYBOARD MODES
The keyboard sounds can be combined in different configurations, by using
the LOWER, UPPER 1 e UPPER 2 (keyboard section) keys, located to
the right of the display.
A LED placed next to each of them shows their ON or OFF status.
It is possible to set the keyboard to FULL or SPLIT modes. By selecting
one of them, the keyboard will work in two different ways.
FULL MODE
When in FULL Mode, you can play over the entire extension of the keyboard
, either using a single Sound or two Sounds layered.
If you wish to play in Full mode, just turn off the LOWER section by hitting
the LOWER key (the led will go out) as well as the ARRANGE ON/OFF
key.
By doing this, the UPPER 1 e UPPER 2 sections, whether single or layered,
will be assigned to the entire range of the keyboard (make sure that
ARRANGE ON/OFF is turned off).
In this mode, when you play with Styles (and the ARRANGE ON/OFF led
is ON), the automatic accompaniment will recognize the current SPLIT
point and will assign the part of the keyboard to the left of the Split to the
LOWER section.
If the LOWER section is turned off, the part of the keyboard to the left of
the Split point will be silent.
The UPPER 1 e UPPER 2 sections can be activated or deactivated,
according to your requirements.
SPLIT MODE
The SPLIT mode gives the opportunity to divide the keyboard into two
separate sections, so that two different Sounds can be used at the same
time: one Sound will be assigned to the section of the keyboard on the left
of the Split point (LOWER) and the other one to the section on the right
(UPPER 1 e/o UPPER 2).
When playing in Real Time you can switch to Split mode by simply turning
the LOWER section on (the LED is on): to do this, press the LOWER key
located to the right of the display.
In this way the keyboard will be divided into two sections, one to the left
and one to the right of the Split point, as standard mode for the instrument.