GEM WK1, Owner'S Manual, Page: 76 / 105

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Digital Signal Processor 67
1
3
2
4
WK1 allows you to process Performances (Style/RealTime, Song Style e Song
Performance) through the on-board multi-effect processor and to make the
overall sound more realistic.
The Digital Signal Processor is made by two units that process the Performances
with Reverb and Modulation / Delay effects.
Each section has independent effects Send control to regulate the effect
volume level in the current Performance.
The DSP control buttons are located in the UTILITY area.
REV/CHO
When it is active (the LED indicator is ON), the current Performance is
processed from the type of effect assigned both to the Reverb and to the
Chorus unit of the DSP. The overall processed sounds can be heard over
the internal speakers and from the LEFT e RIGHT outputs.
When it is not active (the LED is OFF) , the sound is not processed by the
DSP and no effect is given.
Assigning the effects
The way to assign effects to the current Performance is identicaI, no matter
what the selected mode is (Style/Real Time, Song Style, Song).
HOW TO SELECT THE TYPE OF EFFECT
1. Press and the REV/CHO for a few seconds .
The eff The eff The eff The eff The effect currentl ect currentl ect currentl ect currentl ect currently assigned to the P y assigned to the P y assigned to the P y assigned to the P y assigned to the Perf erf erf erf erformance is ormance is ormance is ormance is ormance is
indicated in the displa indicated in the displa
indicated in the displa indicated in the displa
indicated in the display y
y y
y.....
2. Use CURSOR to move and the TEMPO/DATA keys to assign
a different effect to the unit.
You can scroll over the 22 different types of effect available for each
DSP unit.
The same effect can be selected from both the DSP units.
To control the general effect volume, move with the CURSOR key to
the volume and modify it using the TEMPO/DATA, keys.
3. To exit the effect function, use the arrow keys or press ESCAPE.
The selected effects have now been assigned to the current Perfor-
mance.
4. Press and hold STORE PERFORMANCE for a few seconds.
Press ENTER to save the changes in the current Performance.
If a different Performance is selected, or if the same Performance is
selected again before saving the changes, the new effect settings will
be lost and the Performance will be restored to the previous setting.
• 9 Digital Signal Processor
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Note : Use ENTER or ESCAPE keys to switch
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Rotary effect from Slow to Fast.