R
GEM Owner’s Manual - Page 43
Understanding the Features of Your Vehicle
The release handle is located at the rear of the vehicle between the
taillights.
To remove or install rear accessories:
1. Remove contents of rear accessory.
2. Steady it to prevent it from falling.
3. Unlock the release handle with ignition key.
4. Rotate the release handle clockwise to release.
5. Remove the Velcro safety strap.
6. Lift off the GEM.
7. Position the new rear accessory onto the brackets and refasten the
Velcro safety strap.
8. Push forward to engage lock. Test to make sure it is secure. This is
a two stage locking system. If not secure, repeat procedure.
9. Lock the release handle with ignition key.
The capacity of the Back is not intended for any type of
passenger use. Doing so could result in personal injury.
WARNING!
Keep the Back latch in a locked position when operating or
transporting the vehicle. The rear accessory could fall and
cause injury if the safety strap is not used.
CAUTION!
