GEM 649 eSyDrive, Operating Instructions Manual

Page: 8 / 48

www.gemu-group.com 8 / 48 GEMÜ 649 eSyDrive
4 Correct use
- XXXXXXXX|YYYY
Design in accordance with order data
Device-specific data
Year of manufacture
Item number Traceability number Consecutive number
The month of manufacture is encoded in the traceability num-
ber and can be obtained from GEMÜ. The product was manu-
factured in Germany.
The operating pressure stated on the product label applies to
a media temperature of 20 °C. The product can be used up to
the maximum stated media temperature. You can find the
pressure/temperature correlation in the technical data.
4 Correct use
DANGER
Danger of explosion!
▶
Risk of severe injury or death.
●
Do not use the product in potentially
explosive zones.
●
Only use the product in potentially ex-
plosive zones confirmed in the declara-
tion of conformity.
WARNING
Improper use of the product
▶
Risk of severe injury or death.
▶
Manufacturer liability and guarantee will be void.
●
Only use the product in accordance with the operating
conditions specified in the contract documentation and in
this document.
The product is designed for installation in piping systems and
for controlling a working medium.
1. Use the product in accordance with the technical data.
2. Note the supplement acc. to ATEX
3. Please note the flow direction on the valve body.
5 GEMÜ CONEXO
For electronic identification purposes, each replaceable com-
ponent contained in the product you have purchased is
equipped with an RFID transponder (1). Where you can find
the RFID transponder differs from product to product.
1
Fig. 4: Actuator RFID transponder
1
Fig. 5: Diaphragm RFID transponder
1
Fig. 6: Valve body RFID transponder
The CONEXO pen helps read out information stored in the
RFID transponder. The CONEXO app or CONEXO portal is re-
quired to view this information.