GEM 649 eSyDrive, Operating Instructions Manual

Page: 32 / 48

www.gemu-group.com 32 / 48 GEMÜ 649 eSyDrive
11 Delivery
10.3 Connection X3
6
5
3
2
4
7
8
1
8-pin M12 plug, A-coded
Pin Signal name
Pin 1 I + set value input
Pin 2 I – set value input
Pin 3 I + actual value output
Pin 4 GND (actual value output, digital input 1 – 3, er-
ror message output)
Pin 5 Error message output 24 V DC
Pin 6 Digital input 3
Pin 7 Digital input 1
Pin 8 Digital input 2
10.4 Connection X4
1
4
3
2
4-pin M12 built-in socket, A-coded
Pin Signal name
Pin 1 UV, 24 V DC actual value supply
Pin 2 n.c.
Pin 3 GND (actual value supply, actual value input)
Pin 4 X+, process actual value input
Pin 5 n.c.
11 Delivery
●
Check that all parts are present and check for any damage
immediately upon receipt.
The product's performance is tested at the factory. The scope
of delivery is apparent from the dispatch documents and the
design from the order number.
12 Transport
1. Only transport the product by suitable means. Do not drop.
Handle carefully.
2. After the installation dispose of transport packaging ma-
terial according to relevant local or national disposal regu-
lations / environmental protection laws.
13 Storage
1. Store the product free from dust and moisture in its ori-
ginal packaging.
2. Avoid UV rays and direct sunlight.
3. Do not exceed the maximum storage temperature (see
chapter "Technical data").
4. Do not store solvents, chemicals, acids, fuels or similar
fluids in the same room as GEMÜ products and their spare
parts.