GEM 649 eSyDrive, Operating Instructions Manual

Page: 14 / 48

8.3 Pressure
Operating pressure:
MG DN Actuator
version
Elastomer PTFE
Diaphragm
material
all valve
body mater-
ials
Diaphragm
material
Forged
body
Investment
cast
body
10 10 to 20 0A 2, 4, 8, 13, 14,
17, 36
0 - 10 52 0 - 10 0 - 6
25 15 to 25 1A 2, 4, 8, 13, 14,
17, 36
0 - 10 5E 0 - 10 0 - 6
40 32 to 40 1A 2, 4, 8, 13, 14,
17, 36
0 - 5 5E 0 - 2 0 - 2
2A 2, 4, 8, 13, 14,
17, 36
0 - 10 5E 0 - 10 0 - 6
50 50 to 65 2A 2, 4, 8, 13, 14,
17, 36
0 - 10 5E 0 - 10 0 - 6
MG = diaphragm size
All pressures are gauge pressures. Operating pressure values were determined with static operat-
ing pressure applied on one side of a closed valve. Sealing at the valve seat and atmospheric seal-
ing is ensured for the given values.
Information on operating pressures applied on both sides and for high purity media on request.
Leakage rate: Leakage rate A to P11/P12 EN 12266-1
Kv values:
8.4 Product compliance
Pressure Equipment Dir-
ective:
2014/68/EU
Machinery Directive: 2006/42/EC
EMC Directive: 2014/30/EU
Technical standards used:
Interference resistance
DIN EN 61000-6-2
Interference emission EN 61800-3
Category C3
The product is intended for operation in industrial
environments.
Food: Regulation (EC) No. 1935/2004*
Regulation (EC) No. 10/2011*
FDA*
USP* Class VI
* depending on version and/or operating parameters
www.gemu-group.com 14 / 48 GEMÜ 649 eSyDrive
8 Technical data