57
GS-COBRA
For the version 1.8.0.2 no configuration required.
For the version 2.2.0.0 or above, the game has to be launched with the command line
parameter "--telemetry". To do it with the Steam version, right click on No Limits 2 in your
steam application library view, choose Properties, then click on the Set Launch Options
button, and type "--telemetry" without the "".
To do it with the standalone version, open in windows explorer the install folder of No Limits
2, then the "64bit" folder, right click on nolimits2app and choose Create a Shortcut.
Right click on the created shortcut, choose properties, and type "--telemetry" without the "" at
the end of the Target line. Run the game using the shortcut you created. You can move the
shortcut on your desktop.
7.46 Prepar 3D
The successor of Microsoft FSX by Lockheed Martin .
Predefined profiles:
•
FSX P3D +
•
FSX P3D ++
•
FSX P3D +++
To enable telemetry, you have to run the program
Simconnect.msi
located in the folder
redist\Interface\FSX-SP2-XPACK\retail\lib
in your Prepar3d install. Doing so will install the Simconnect telemetry library.
7.46.1 Frames per second
Telemetry frequency in Prepar3D is frame dependant. To get the best sensations, you have
to ensure the frame rate stays above 20fps. To display the frame rate on top of the screen,
press Shift + Z two times.
7.46.2 Controls sensitivity
It is very important to configure properly the sensitivity of your analog controls in Prepar3D.
Too sensitive controls give brutal plane moves and GS-COBRA forces.
The default sensitivity in Prepar3D adds a very disturbing delay in commands which can
prevent you from piloting accurately. We strongly recommend to switch the sensitivity mode
with the following modification:
(You have to make hidden files and folders visible in windows explorer parameters)
•
Open the
Prepar3D.cfg
you can find:
On Windows XP in
