32
GS-COBRA
dofile( lfs.writedir().."/Scripts/GekoSystemsTelemetryExporter.lua")
(You can find this line in the file
readme.txt
in the folder
C:\Program Files\Geko
Systems\GSeat Manager\DCS
)
7.8.1 Frames per second
Telemetry frequency in DCS is frame dependant. To get the best sensations, you have to
ensure the frame rate is high enough.
7.8.2 Controls sensitivity
It is very important to configure properly the sensitivity of your analog controls in DCS. Too
sensitive controls give brutal plane moves and GS-COBRA forces.
7.8.3 Attitudes forces
To improve immersion, the attitude forces contain additional vibrations caused by the plane
engine, ground and turbulence. These vibrations are generated by the GSeat Manager from
real life vibrations records adjusted to plane and wind characteristics.
7.9 Dirt 2
CodeMasters rally game.
Predefined profiles:
•
DIRT2-3-RGRID2-AS+
•
DIRT2-3-RGRID2-AS++
•
DIRT2-3-RGRID2-AS+++
Required steps to enable telemetry:
•
Open the file
C:\Users\[UserName]\My Documents\
My Games\Dirt2\hardwaresettings\hardware_settings_config.xml
with a text editor like notepad and replace the line
<motion enabled="true" ip="dbox" port="20777" delay="1"
extradata="0" />
