GEITH QC100 H1, Manual

Page: 45 / 58

www.geith.com 4-7
MAINTENANCE
Figure 46
Remove spring assembly (1)
[Figure 46]
.
Figure 47
Remove the sliding hook main pivot pin (1)
[Figure 47]
.
Remove the sliding hook from the quick coupler.
NOTE: For completion of Mechanical Quick Coupler
disassembly see Disassembly (Mechanical
Coupler QC45 - QC110) on Page 4-8.
Figure 48
Using a punch and hammer, remove the rear sliding hook
retaining roll pins (1)
[Figure 48]
.
Figure 49
Using flat head screw driver remove the rubber bungs (1)
[Figure 60]
.
Figure 50
Fully rotate the cylinder (1)
[Figure 61]
up, then lift and
remove cylinder.
NOTE: To assemble parts, repeat steps in reverse.
1
1
1
1
1