Dateiname mit Revisionsstand:
erstellt am:
erstellt von:
geprüft von:
freigegeben von:
Seite
ESU-X 500TT_EN B
01.06.15
cgro
cg
cgro
30 von 45
“BLEND CUT 2”: current for the cut with very strong coagulating effect. It is suitable for the polipectomy
(starting from 25/40 in case of small polyps)(starting from 40/60 in case of larger polyps) .
“BLEND CUT PULSED”: current identical to the BLEND CUT 1 current, but provided with a pulsed
delivery which allows the users the better control of the cut phase.
“AUTO PAPILLO PURE CUT”: It is suitable (starting from the effect 5/6) to cut without coagulating effect
(I.e. for papyllotomy, sphynterotomy and cut of mucosa).
“AUTO POLIPO BLEND CUT”: It is suitable (starting from the effect 5/6) to cut with efficacious
coagulating effect. (I.E. for polipectomy).
“AUTO ENDO CUT”: It is suitable (starting from the effect 5/6) to cut/coagulate with phases of cut and
coagulation. When selecting these corrents, the screen also shows the MS keys which switch ON/OFF
by pushing them and allow the users to select the preferred delivery as under detailed.
Current:
Auto papillo pure cut.
Auto polipo blend cut.
All keys are OFF.
The first key is ON.
The second key is ON.
The third key is ON.
The delivery is continuous.
The delivery is pulsed (fast modulation).
The delivery is pulsed (medium modulation).
The delivery is pulsed (slow modulation).
Current:
Auto Endo cut.
All keys are OFF.
The first key is ON.
The second key is ON.
The third key is ON.
The delivery is 90% coagulation, 10% cut.
The delivery is 80% coagulation, 20% cut.
The delivery is 70% coagulation, 30% cut.
The delivery is 50% coagulation, 50% cut.
The following currents are suitable for the monopolar or bipolar coagulation:
“FULG FORCED COAG” or “PIN POINT CONTACT COAG” monopolar coagulations. They are suitable
(starting from 20/30) to coagulate by both touching and grazing the tissue.
“SOFT MICRO BICOAG” bipolar coagulation (The only current usable for this endoscopy). It is suitable
(starting from 20/30) to coagulate during all procedures.
DELIVERY OF THE MONOPOLAR AND BIPOLAR CURRENTS
(MONOPOLAR CUT / COAGULATING CUT) Set the MONO mode and push the yellow pedal. The
delivery is signalled by an acoustic signal (low, adjustable in the GENERAL MENU) and by the big
image on the touch screen.
(MONOPOLAR COAGULATION) Set the MONO mode and push the blue pedal. The delivery is
signalled by an acoustic signal (acute, adjustable in the GENERAL MENU) and by the big image on the
touch screen
(BIPOLAR SOFT MICRO BICOAG) Set the BIP mode and push the blu pedal. The delivery is signalled
by an acoustic signal (acute, adjustable in the GENERAL MENU) and by the big image on the touch
screen.
THE ALARM SIGNALS DURING USE
During the use, in case of breakages, problems or mistakes of use, the self
‐
check system stops the power
delivery and it informs users by acoustic and visual signals. In case of immediately solvable problems, users can
intervene to eliminate causes. For other signals users can switch the unit OFF/ON to verify them and ask for
technical assistance.
THE MOST COMMON SIGNALS
See the TABLE I of the paragraph SELF
‐
CHECK SYSTEM where the complete operation of the self
‐
check
system is detailed.
Use for the, under liquid, endoscopy of the monopolar currents (MEMORIES
FROM 75 TO 84)
These memories allow the use of the monopolar currents suitable for the, under liquid, monopolar endoscopy in
UROLOGY, GYNAECOLOGY and ARTHROSCOPY by a foot
‐
switched resectoscopes or instrument.
WARNINGS AND PRECAUTIONS FOR THE OPERATION
To perform all operations, carefully apply all the warnings of the paragraph BASIC WARNINGS!
SETTING OF THE CURRENTS
To set, memorize and change the currents. Follow the instructions of the paragraph FIRST SETTING.
To choose the best currents and the starting powers for the specific need. See, in this section, the
paragraph INDICATIONS FOR THE SUITABLE CURRENTS.
CONNECTION AND USE OF THE FOOT
‐
SWITCHES
