![background image](http://html1.mh-extra.com/html/gehl/ge-802/ge-802_operators-manual_2205872005.webp)
Our Dealer network stands by to provide you with any assis-
tance you may require, including genuine GEHL service
parts. All service parts should be obtained from your GEHL
Dealer. Give complete information about the part and
include the model and serial number of your machine.
Record the serial number in the space provided on this page,
as a handy reference.
Purchased From:
Date of Purchase:
Model No.:
Serial No.:
SERIAL NUMBER LOCATION
The serial plate is located on the inside cab wall next to the
throttle lever (Figure 1-1).
PRINTED IN U.S.A.
1-1
90
8147
/0999
GENERAL INFORMATION
The information in this Operator’s Manual was written to
give the owner/operator assistance in preparing, adjusting,
maintaining and servicing the Crawler Excavator. More
importantly, this manual provides an operating plan for safe
and proper use of the machine. Major points of safe opera-
tion are detailed in Section 2–Safety Information.
The GEHL
®
Company asks that you read and understand the
contents of this manual COMPLETELY and become familiar
with your new machine BEFORE attempting to operate it.
Consult your GEHL Dealer to obtain extra manuals, or manu-
als in other languages.
Throughout this manual, information is provided which is set
in italic type and introduced by the word NOTE or IMPOR-
TANT. Be sure to read carefully and comply with the mes-
sage. Following this information will improve your operat-
ing and maintenance efficiency, help you to avoid breakdown
and damage, and extend the machine’s life.
Do not use this machine for any application or purpose other
than those described in this manual. If the machine is to be
used with special attachments or equipment other than those
approved by Gehl, consult your GEHL Dealer. Any person
making unauthorized modifications is responsible for the
consequences.
The use of this equipment is subject to certain hazards that
cannot be eliminated by mechanical means, but only by exer-
cising intelligence, care and common sense. Such hazards
include, but are not limited to, hillside operation, overload-
ing, instability of the load, poor maintenance and using the
equipment for a purpose for which it is not intended or
designed.
It is essential to have competent and careful operators, who
are not physically or mentally impaired, and who are thor-
oughly trained in the safe operation of the equipment and the
handling of loads. It is recommended that the operator be
capable of obtaining a valid motor vehicle operator’s license.
GEHL Company reserves the right to make changes and
improvements in the design and construction of any part
without incurring the obligation to install such changes on
any unit previously delivered.
INTRODUCTION
IMPORTANT!
Keep these instructions with the machine for future reference.
If the machine changes ownership, be sure this manual accompanies the equipment.
NOTE:
All references to Left-hand or Right-hand are determined from sitting in the operator’s seat and facing forward.
Serial Plate
Figure 1-1. Serial Number Location
Summary of Contents for GE 802
