Gehl GE 802, Operator'S Manual

Page: 19 / 52

PRINTED IN U.S.A.
3-1
90 8147 /0999
OPERATION
WARNING
Be sure you are familiar with all safety devices
and controls before operating the machine.
Know how to stop before starting. This GEHL
®
Company machine is designed for use only
with GEHL
® Company approved accessories or
referral attachments. The GEHL
®
Company
cannot be responsible for operator safety if the
unit is used with non-approved attachments.
GENERAL INFORMATION
WARNING
Instructions are necessary before operating
the machine. Read and understand this entire
manual. Follow warnings and instructions for
operation and maintenance. Check for correct
function after adjustments or maintenance.
Failure to follow instructions can result in
injury or death.
Guards & Shields
Whenever possible, guards and shields are used to protect
potentially hazardous areas on the machine. In many places,
decals are also provided to warn of potential hazards and/or
to display special operating procedures (see Safety Decals
Locations in Section 2).
The operator’s seat left-hand console must be raised in order
to exit the cab. In the raised position, the left-hand console
locks out all hydraulic functions of the machine (Figure 3-1).
WARNING
Read and thoroughly understand all safety
decals before operating the machine. DO NOT
operate the machine unless all factory installed
guards and shields are in place.
Armrest Lever
Left-Hand Console
In Raised Position
Figure 3-1. Left-Hand Console Raised