PRINTED IN U.S.A.
4-7
90
8147
/0999
Checking Engine Oil Level
ENGINE
Figure 4-2. Engine Oil Dipstick
IMPORTANT: See the lubricant list for engine oil
grade. Only use engine oil specified, or of equiva-
lent quality and grade, or damage to the engine
could occur.
The machine must be on a level surface and the engine
turned off.
1.
Run the engine until it is at operating temperature, then
turn the engine off.
2.
Pull the engine cover latch lever (located next the right
side of the operator’s seat) and raise the engine cover.
3.
Check the engine oil level using the dipstick located on
rear of the engine (Figure 4-2).
4.
Add oil if required.
NOTE:
The marks on the dipstick indicate the minimum
and maximum oil levels.
Dipstick
NOTE:
Be sure to read the engine manual supplied with
this machine.
Recommended Lubricants
ENGINE OIL
A diesel engine oil conforming to SAE grade 10W 30 or
15W 40, and API classification CD (or higher, e.g., CH-4),
such as BP Vanellus MG 15W 40, BP Vanellus C-Extra
10W 30, or Chevron Delo 400 15W 40
HYDRAULIC OIL
A hydraulic oil with anti-wear,anti-foam, and anti-oxidation
additives that conforms to ISO Viscosity Grade 46, such as,
Mobil DTE 15M, Amoco Rykon 46, or BP Energol
HLP-HD 46.
SLEWING RING
A heavy-duty lithium complex grease with 3% molybde-
numdisulfide, such as Chevron RPM Heavy Duty Grease No.
2, Mobilgrease Moly 52, or BP Energrease Moly EP2.
TRAVELLING GEAR UNIT
An EP grade gear oil that conforms to API GL 5, such as
Chevron Delo Gear 80W 90 or BP Transgear 80W 90
SLEWING GEAR UNIT
An EP grade gear oil that conforms to API GL 5, such as
Chevron Delo Gear 80W 90 or BP Transgear 80W 90
EXCAVATOR ARM
A heavy-duty lithium complex grease with 3% molybde-
numdisulfide, such as Chevron RPM Heavy Duty Grease No.
2, Mobilgrease Moly 52, or BP Energrease Moly EP2.
ALL LUBRICATION POINTS
A heavy-duty lithium complex grease with 3% molybde-
numdisulfide, such as Chevron RPM Heavy Duty Grease No.
2, Mobilgrease Moly 52, or BP Energrease Moly EP2.
RANGES OF APPLICATIONS
From -13°F to +104°F (-25°C to +40°C)
outside temperature
NOTE:
All listed greases are suitable for
-13°F to +104°F (-25°C to +40°C).
Summary of Contents for GE 802
