Gehl GE 802, Operator'S Manual

Page: 23 / 52

PRINTED IN U.S.A.
3-5
90 8147 /0999
Figure 3-5. Auxiliary Hydraulics Pedal
- +
00000000
HOURS
1
2
3
4
5
6 7
8
9
10
14
15
16
17
11
12
13
Figure 3-6. Console Controls
LEFT-HAND CONTROL LEVER (FIGURE 3-3)
1. Move the left-hand lever forward to move bucket arm
away from the machine.
2. Move the left-hand lever to the rear to move the arm
towards the machine.
3. Move the left-hand lever to the left to slew superstruc-
ture to the left.
4. Move the left-hand lever to the right to slew superstruc-
ture to the right.
RIGHT-HAND CONTROL LEVER (FIGURE 3-4)
5. Move the right-hand lever forward to lower the boom.
6. Move the right-hand lever to the rear to raise the boom.
7. Move the right-hand lever to the left to close the bucket
(bucket moves up and toward the boom).
8. Move the right-hand lever to the right to open the bucket
(bucket moves down and away from the boom).
AUXILIARY HYDRAULICS PEDAL (FIGURE 3-5)
Lift the protective shield, then depress the pedal left or right
while depressing the switch located on top of the left-hand
control lever to slew only the bucket (superstructure will
remain stationary).
DOZER BLADE
The dozer blade is raised and lowered by the dozer lever
w/foot pedal (Figure 3-2). Push the lever forward to lower
the blade; pull the lever to the rear to raise the dozer blade.
1. FUEL LEVEL GAUGE
The fuel gauge shows the level of fuel in the tank.
2. COOLANT TEMPERATURE INDICATOR
Indicator light comes on when coolant temperature is too
high.
3. BATTERY VOLTAGE INDICATOR
Indicator light comes on when battery voltage is too low.
4. ENGINE OIL PRESSURE INDICATOR
During normal operation, this indicator light should remain
off. The indicator will light if the engine oil pressure drops
too low. If this occurs, shut off the engine IMMEDIATELY
and determine the cause of the pressure drop.
5. GLOW PLUG INDICATOR
Indicator light comes on when the ignition key is turned on.
Indicator will go out when glow plugs have heated sufficient-
ly to start the engine.
6. ENGINE AIR FILTER INDICATOR
Indicator light comes on when engine air filter is too dirty.
Console Controls (Figure 3-6)
7. HYDRAULIC OIL LEVEL INDICATOR
Indicator light comes on when hydraulic oil level is too low.
Shut off engine and add oil.
8. LOW FUEL INDICATOR
Indicator light comes on when fuel level is too low.
9. WORK LIGHTS INDICATOR
Indicator light comes on when work lights are turned on.
Must use with Boom Swing Switch on Left-Hand Control