Gehaka G650i, User Manual

Page: 33 / 48

Moisture Meter G650
i
I
33
Always use an Alkaline battery, since this type of battery does not leak chemical
compounds over the years. Dispose the battery in a suitable way, because it is harmful to
the environment.
The battery is installed in the meter bottom (right-hand foot) and to replace it follow the
steps below:
When we switch the adapter connector off the mains, the G650
i
will continuously operate
on the battery for a period of nearly 20 hours. In order to save battery, enable the “AUTO
SWITCH OFF” function, then after 5 minutes without operation the G650
i
will automatically
switch off.
If the battery voltage drops below the safety limit that ensures the proper operation of
the device, the display will show the message “Replace Battery” and will stop performing
measurements, thus indicating the need of battery replacement.
Battery replacement
Remove G650
i
from the mains
Remove the power cord from the meter
Remove the meter discharge drawer
Backward lie down the device in order to access
the bottom
Remove the two screws from the right-hand side
Remove the battery releasing it from the clip
Install the new battery
Put the screws backs
1.
2.
3.
4.
5.
6.
7.
8.