Gehaka G650i, User Manual

Page: 18 / 48

18
I
Moisture Meter G650
i
This function makes the Date and Time adjustment of the real time clock (RTC). This value of
date and time will be sent in the reports through RS232 Serial Port after the measurement.
G650
i
is already delivered with the clock adjusted at the factory, but it may eventually be
readjusted for the daylight saving time.
There is an internal battery that keeps the clock working even when the G650
i
meter is
disconnected from the power outlet.
This battery lasts for over 5 years; to have it tested, just disconnect the G650 i meter and
see if the clock indicates 00:00:80, if this happens, contact Gehaka Service to replace the
battery.
To perform the Date and Time adjustment:
1. Go to “Configuration” and depress YES; you have to put the Hard Lock in the serial
output;
2. Go to function “5.1 Date and Time Adjustment” and depress YES;
5.1. Date and time adjustment
If you wish, remove the key after entering the
“Configuration” function, there is not a new checking.
When you exit the function, it will be locked again.
G650
i
settings and Equations can only be changed
with the presence of the Hard Lock key, this ensures
improved security.